1992-096-RES WHEREAS, the City of Paris, has need for professional services and Hayter Engineering, Inc., 4445 S. E.

Home Browse Search

to properly perfor~ duties and responsibilities assumed by ENGINEER in the cont~ac~ documents. SECTION 2 - ADDIT!ONALSERV!CES OF ENGINEER 2.1. Services Reauirina Authorization in Advance If authorized by OWNER, ENGINEER shall furnish or obtain from others Additional Services of the types listed in the paragraphs of Section 2.1. These services are not included as part of Basic Services, except to the extent provided otherwise in Exhibit A "Further Desc~iption of Basic Engineering Services and Related Matters;" these will be paid for by OWNER, as indicated in section 5. 2.1.1. p~epa~ation of applications and supporting documents (in addition to those furnished under Basic Services) for private or governmental grants, loans or advances in connection with the Project; review and evaluation of the effect on the design requirements of the Project of any documents prepared by others; and assistance in obtaining approvals of authorities having jurisdiction over the anticipated environmental impact of the Project. 2.1. 2. existing drawings services to make measured drawings of or to investigate conditions or facilities, or to verify the accuracy of or other information furnished by OWNER. 2.1.3. Services resulting from significant changes in the general scope, extent or character of the Project or its design including, but not limited to, changes in size, complexity, OWNER'S schedule, character of construction or method of financing; and revising previously accepted studies, reports, design documents or contract documents, when such revisions are required by changes in laws, rules, regulations, ordinances, codes or orders enacted subsequent to the preparation of such studies, reports or documents, or are due to any other causes beyond ENGINEER'S control. 2.1.4. Providing renderings or models for OWNER'S use. 2.1.5. Preparing documents for alternate bids requested by OWNER for CONTRACTOR(S) work which is not executed, or documents for out- of-sequence work. 2.1.6. Furnishing services of independent professional associates and consultants for other than Basic Services (which include, but are not limited to, customary civil, structural, mechanical and electrical engineering and customary architectural design incidental thereto); and providing data or services of the types described in paragraph 3.4. when OWNER employs ENGINEER to provide such data or services in lieu of furnishing the same in accordance with paragraph 3.4. Page 7 of 23 Pages