My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2020-051 - Amendments to Section 7-18 of Article II Building Code Chapter 7 - Buildings and Building Regulations - Revise the Local Amendment sot the 2015 International Building Code and the 2015 International Residential Code
City-of-Paris
>
City Clerk
>
Ordinances
>
2011-2020
>
2020
>
2020-051 - Amendments to Section 7-18 of Article II Building Code Chapter 7 - Buildings and Building Regulations - Revise the Local Amendment sot the 2015 International Building Code and the 2015 International Residential Code
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
10/13/2020 12:27:37 PM
Creation date
10/13/2020 12:23:55 PM
Metadata
Fields
Template:
CITY CLERK
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
38
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
SPA.„ NONPORTABLE. See "Swimming pool." <br />SPA PORTABLE. A non ermanent structure intended for recreational bathin , jn which all controls <br />water-heatin and water -circulating ITeoui amentITareITITanITITinte raj.pg!jof 1he_ofo4uct--1 <br />SWIMMING POOL. Anv structure intended for swimming or recreational bathin that contains water more <br />than 24 inches 610 mm _deed. This includes in round abo round and on- round swimmingpools <br />hot tubsands ITas- <br />SWIMMING POOL INDOOR. A swimming ool which is totally contained within a structure and <br />surrounded on all four sides by the walls of the enclosing structure. <br />SWIMMING POOL OUTDOOR. Any swimminmm ool which is not an indoor pool. <br />SECTION AG103 SWIMMING POOLS <br />AQ103.1 In round pools. <br />In -cry ound wools shall be designed and constructed in.comI liance with ANSI/NSPI 5. <br />AQ103 2Above-aground and on -ground pools. <br />Above round and on -around pools shall be designed and constructed in compliance with ANSI/NSPI-4. <br />AQ103.3 Pools in flood hazard areas. <br />In flood hazard areas established b Table R301.2 1i„ ools in coastal high -hazard areas shall be, <br />designed and constructed in compliance with ASCE 24. <br />SECTION AQ104 SPAS AND HOT TUBS <br />AQ104.1 Permanently installed spas and hot tubs. <br />Permanently installed spas and hot tubs shall be desi ned and constructed in compliance with <br />ANSI/NSPI-3. <br />AQ104.2 Portable spas and hot tubs. <br />Portable spas and hot tubs shall be designed and constructed in compliance with ANSI/NSPI-6. <br />SECTION AQ105 BARRIER REQUIREMENTS <br />AQ105.1 Application. <br />The grovisions of this appendix shall control the design of barriers for residential swimming ools, spas <br />and hot tubs. These design controls are intended to provide protection against potential drownings and <br />near-drownin s bv restrictina access to swimming ools spas and hot tubs. <br />AQ105.2 Outdoor swimmin ool. An outdoor swimmin pool, including an in -ground, above -ground or <br />on round 000l, hot tub ors a shall be surrounded by a barrier which shall comply with theefollowin <br />1. The top of the barrier shall be at least 48 inches 1219mm above rade measured on the side of the <br />barrier, which faces away from the swimming ool. The maximum vertical clearance betweenro ade and <br />the bottom of the barrier shall be 2 inches 51 mm' measured on the side of the barrier, which faces away <br />from the swimmin pool. Where the top of the pool structure is above grade such as an above -ground <br />pool the barrier may be at ground level such as the pool structure or mounted on top of theITpooi <br />structure. Where the barrier is mounted on top of the pool structure the maximum vertical clearance <br />between the too of the pool structure and the bottom of the barrier shall be 4 inches (102mm). <br />2Oening�_in_the barrier shall not allow passage of a 4 -inch -diameter 102mm sphere. <br />3. Solid barriers which do not have o enin;gs such as a masonry or stone wall. shall not contain <br />indentations or protrusions except for normal construction tolerances and tooled masonr�rjoints. <br />4. Where the barrier is composed of horizontal and vertical membersandthe distancebetween the tows <br />of the horizontal members is less than 45 inches 1143mm', the horizontal members shall be located on <br />10 2015 1RC Amendments <br />
The URL can be used to link to this page
Your browser does not support the video tag.