Laserfiche WebLink
PARIS POLICE DEPARTMENT TES 08"22-2007 <br />LICENSE AGREEMENT #345 <br />3.1 The E911 Interface software shall be loaded by CIS remotely on the User's <br />Computer (Server). <br />3.2 No on-site installation is proposed. <br />3.3 CIS will provide telephone support to facilitate Paragraph 4.0 below. <br />4.0 USER RESPONSIBILITY <br />4.1 The User shall define one (1) Server Serial Port for connection to the User's ALI <br />Controller. A Workstation may be used under special circumstances. Check <br />with CIS. <br />4.2 The User shall provide a cable between the ALI Controller's CAD Port and above <br />Serial Port. <br />4.3 User shall arrange for the ALI Controller's Installer to be on-site to configure the <br />CAD Port and Cable Pins and Test the transmission of ALI Messages to the <br />CAD. User shall schedule the Installer's on-site configuration and test with CIS <br />for CIS to provide technical support by telephone. <br />INSTALLATION OF THE E911 INTERFACE REQUIRES COMPLIANCE BY THE <br />USER WITH THE ABOVE PROCEDURE. <br />4.4 In the event that the ALI Message as displayed on the CAD Screen is not <br />synchronized with the ALI Message Display, the User will be directed by CIS <br />Support to a CIS Procedure that will record ALI Messages. The User shall then <br />send the ALI Message records to CIS via e-mail. CIS shall then customize the <br />E911 Interface to the local ALI Message Format and download the revised <br />software to the User. <br />5.0 MAPPING FUNCTIONS <br />CAD -E911 Mapping Functions including Phase 2 Wireless requires an additional <br />CAD -Map Interface (Addendum X(3) or latest). Check with CIS for availability. <br />rmsdoc.addendaxad e911 interface-e(w) <br />2-3-D3 <br />53 <br />