Laserfiche WebLink
Manufactured Home and its subsequent connection to the utility risers if they are <br />located within the skirted area. <br />3) The skirted area shall be ventilated by no less than two openings in the skirting, <br />each providing a minimum ventilating area of not less than fifty square inches, <br />installed so as to provide adequate cross-ventilation. Such openings shall be <br />covered with corrosion-resistant wire mesh not less than one fourth inch or more <br />than one-half inch in any dimension or a corrosion-resistant louver. <br />4) The skirting must be uniform in color and appearance to the HUD-Code <br />Manufactured Home and made of materials suitable for ground contact. <br />(Per Planning and Zoning by a vote of 6-0, language by SN) <br />17. Revise Section 22-50 Refuse and Garbage to remove the last paragraph that references <br />requiring a refuse pickup easement. The City only collects residential waste froin <br />individual houses. (SN) <br />18. Revise Section 22-52 Conform to Codes to add Manufactured Housing Rules <br />(Administrative Rules of the Texas Department of Housing and Community Affairs 10 <br />Texas Administrative Code, Chapter 80). (SN) <br />cc: Kevin Carruth, City Manager <br />Page 3 of 3 <br />~O <br />