Laserfiche WebLink
KEY CONTROL GAS PUl9P SPECIFICATIONS <br />1. Pumping Units <br />A. Air Separators <br />1. The pumping units wi11 be not less than 14 qalZons per minute <br />models. <br />2. The units wi11 be the vazle type pumpinq unit and integraZ cast <br />aluminum air separator. <br />B. Registers <br />1. The pumping units shall have non-computer interlock reading <br />both the front and back of the pump. <br />2. There wi11 be not less than a 1,000 gallon delivery and nat <br />less than a 1 million gallon totalizer. <br />C. Meters <br />1. The meters shall be four piston positive displacement, exter- <br />na1 accuracy adjustment or nutatinq disc meters with external <br />adjustment. <br />D. Motors <br />1. The motors shall be not Iess than 113 horsepower. <br />2. They shall be explosion-proof with a thermal overload protector. <br />3. There shall be a built-in switch on each unit. <br />4. The units wi11 have standard 120 voltaqe capability. <br />E. Hose and Nozzle <br />1. The hose shall be not Iess than 314" in diameter and not Iess <br />than 14' in length. <br />2. There wi1Z be one (1) standard automatic closing nozzZe; and <br />two (2) no-lead automatic closing centers. <br />G. A11 models shall have the underwriters approval and certification. <br />II. Key Control Systems <br />A. General <br />1. .The key control systems shall be mourited on and connect_ed to the <br />pumping units. <br />2_ One pumpinq unit shall have a 20 key control mounted on the side <br />of the unit. <br />3. The second pumping unit s12a1l have a 25 key control mounted on <br />, the side of the unit. <br />