Laserfiche WebLink
ERI Consulting, Inc. <br /> <br /> 4.5.1 Laboratory utilized for analyzing air samples by NIOSH 7400 (PCM) <br /> shall be satisfactory participants in the NIOSH Proficiency <br /> P. nalytical Testing (PAT) program. <br /> <br /> 4.5.2 Laboratories analyzing by pLM for bulk material identification shall <br /> be accredited by the NV-hAP program for NIST. <br /> <br /> 4.5.3 Laboratories analyzing air samples by TEM clearance shall be <br /> accredited for TEM analysis by the NVLAP program of NIST. <br /> <br /> 4.5.4 The period of time permitted between the collection of air samples <br /> and the availability of results shall be less than 24 hours for <br /> samples collected during abatement activities. Time tables for <br /> results of pre-abatement and clearance air samples shall be <br /> established by the Owner's Representative. <br /> <br /> 4.5.5 Air samples which are taken by or at the direction of the Owner's <br /> Representative will be analyzed at the laboratory specified by him. <br /> <br /> 4.5.6 After January 1, 1993 laboratories located in Texas must be licensed <br /> by the Texas Department of Health (see Scope of Work). <br /> <br />The specific procedures described in the Scope of Work take precedence over any <br />other part of the Specifications in Section 1.2 through 4.5 inclusive, except <br />that, requirements of the applicable regulations, if more stringent, shall be <br />followed. <br /> <br /> 4/11/03 77 <br /> <br /> <br />