Laserfiche WebLink
IB,. Test reports per Paragraph 1.08, Test Reports, of this Specification. <br />,L05 STAINDAIRIC;DS <br />A. Provide a testing laboratory that complies with the ACIL (American Council of <br />Independent Laboratories) "Recommended Requirements for Independent <br />Laboratory Qualifications". <br />B. Perform testing per recognized test procedures as listed in the various sections of the <br />Specifications, standards of the State Department of Highways and Public <br />Transportation, American Society of Testing Materials (ASTM), or other testing <br />associations. Perform tests in accordance with published procedures for testing <br />issued by these organizations. <br />1.06 DELIVERY AND STORAGE <br />Handle and protect test specimens of products and construction materials at the construction <br />site in accordance with recognized test procedures. <br />1.07 VERIFICATION I <br />A. Provide verification testing when tests performed by the OWNER indicate that <br />materials or the results of construction activities are not in conformance with Contract <br />Documents. <br />B. Verification testing is to be provided at the CONTRACTOR's expense to verify <br />products or constructed works are in compliance after corrections have been made. <br />C. Tests must comply with recognized methods or with methods recommended by the <br />OWNER's testing laboratory and approved by the ENGINEER. <br />1.08 TEST REPORTS <br />A. Test reports are prepared for all tests. <br />1. Tests performed by testing laboratories may be submitted on their standard <br />test report forms. These reports must include the following: <br />a. Name of the OWNER, project title and number, equipment installer <br />and general contractor. <br />b. Name of the laboratory, address, and telephone number. <br />C. Name and signature of the laboratory personnel performing the test. <br />d. Description of the product being sampled or tested. <br />e. Date and time of sampling, inspection, and testing. <br />f. Date the report was issued. <br />g. Description of the test performed. <br />h. Weather conditions and temperature at time of test or sampling. <br />i. Location at the site or structure where the test was taken. <br />j. Standard or test procedure used in making the test. <br />k. A description of the results of the test. <br />I. Statement of compliance or non-compliance with the Contract <br />Documents. <br />M. Interpretations of test results, if appropriate. <br />2. Submit reports for tests performed by CONTRACTOR or his suppliers or <br />vendors. <br />City of Paris, Texas 01 40 00 Page 3 of 4 Quality Control <br />9/10/2020 <br />