Laserfiche WebLink
Scope of Work - Lead Paint Abatement Irerracon <br />Grand Theatre n 21 Lamar Avenue, Paris, Texas <br />April 11, 2011 in Terracon Project No. 94107645 <br />6.0 PRODUCTS <br />Amended Water: Provide water to which a surfactant has been added. Use a mixture of <br />surfactant and water which results in wetting of the ACM and retardation of fiber release <br />during disturbance of the material. <br />Disposal Ba4s: Provide as a minimum, individual, 6 mil thick, leak-tight, manufactured <br />polyethylene bags. <br />Polyethylene Wrap: Provide minimum 6 mil polyethylene sheeting as a wrapping for <br />large sections of rigid waste material and for construction of floors and critical barriers in <br />the containment areas. Provide minimum 4 mil polyethylene sheeting for construction of <br />walis of the containment. <br />Tri-Sodium Phosphate: Provide a detergent solution for cleaning abated surfaces. <br />7.0 VISUAL INSPECTION/WIPE TESTING <br />The CONSULTANT shall verify that the Work performed is in compliance with applicable <br />regulations and that the building areas beyond the Work Area and the outside <br />environment remain free of contamination. <br />Upon completion of the lead paint abatement, in a particular area, and a satisfactory <br />visual inspection by the Owner's Representative in a given work area, a preliminary <br />cleaning shall be perFormed by the Contractor. This cleaning includes removal of any <br />contaminated material, equipment or debris including polyethylene sheeting from the <br />work area. Where polyethylene sheeting has been used, it shall be sprayed or misted <br />with water for dust control, debris removed, and then the sheeting removed by folding it <br />in upon itself. The following methodology shall be utilized during the cleanup prior to <br />clearance. <br />a) The lead-contaminated dust or debris shall be containerized in accordance with <br />the work plan. <br />b) Once the polyethylene sheeting, is removed from the work area, cleaning shall <br />begin. It shall be done in the following sequence: HEPA vacuum; Tri-Sodium <br />Phosphate (TSP) wash (or other cleaner approved by the Owner's Representative); <br />clean water rinsing and HEPA vacuum. <br />c) HEPA vacuum all surfaces. Begin with ceilings and proceed down the walls, <br />including window, doors, all trim, and ending with floors. Begin vacuuming at the <br />farthest corner away from the entrance to the work area. <br />c m 8 <br />