08-L HMAC Street Overlay Award - Laserfiche WebLink

Home Browse Search

p[etion of the Work. these record documents, samples and Shop Drawings will be delivered to ENGINEER for OWNER. Safe~y and Protections: * 6.20. CONTRACTOR shall be responsible for initiating. maintaining and supervising all safety precautions and pro- grams in connection with the Work. CONTRACTOR shall take all necessary precautions for the safety of. and shall provide the necessaO' protection to prevent damage, injury or loss to; 6.20. I. all employees on the Work and other persons and organizations who may be affected thereby; 6.20.2. all the Work and materials and equipment to be incorporated therein, whether in storage on or off the site; and 6.20.3. other property at the site or adjacent thereto, ' including trees, shrubs, lawns, walks, pavements, road- ways, structures, utilities and Underground Facilities not. designated for removal, relocation or replacement in the course of constn-'¢tion. CONTRACTOR shzll comply with all applicable Laws and Regulations of any public body having jurisdiction for the safety of persons or property otto protect them from damage, injury or loss; and shall erect and maintain all necessary safeguards for such safety and protection. CONTRACTOR shall notify owners of adjacent property and of Underground Facilities and utility owners when prosecution of the Work may affect them, and shall cooperate with them in the pro- tection, removal, relocation and replacement of their prop- erty. All damage, injury or loss to any property refeffed to in paragraph 6.20.2 or 6.20.3 caused, directly or indirectly. in whole or in part. by CONTRACTOR. any Subcontractor, Supplier or any other person or organization directly or indi- rectly employed by any of them to perform or furnish any of the Work or anyone for whose acts any of them may be liable, shall be remedied by CONTRACTOR (except damage or loss attributable to the fault of Drawings or Specifications or to the acts or omissions of OWNER. or ENGINEER or anyone employed by either of them or anyone for whose acts either of them may be liable, and not attributable, directly or indi- rectly, in whole or in part. to the fault or negligence of CON- TRACTOR}. CONTRACTOR's duties and responsibilities for the safety and protection of the Work shall continue until such time as all the Work is completed and ENGINEER has issued a notice to OWNER and CONTRACTOR in accord- ance with paragraph 14.13 that the Work is acceptable (except as other'wise expressly provided in connection with Substan- tial Completion). 6.21. CONTRACTOR shall designate a responsible rep- resentative at the site whose duty shall be the prevention of accidents. This person shall be CONTRACTOR's superin- tendent unless otherwise designated in writing by CON- TRACTOR to OWNER. 6, '~a In emergencies affecting thc safety or protection of per.~;,~; or thc Work or property at the sitc or udjace~,, thereto. CONTRACTOR. without special instruction or authorization from ENGINEER or OWNER, is obligated to act to prevent threatened damage, inju~ or loss. CO NTRA~OR shall give ENGINEER prompt written notice ifCONT~ORbeficves that a~y significant changes [n the Work or variations from tbe Contmet Documents have been eaused thereby. If ENGI- NEER dete~ines that a change in the Contract Documents is required because of the action taken in response to an emergency, a Work Directive Change or Change Order will be issued to document the consequences of the changes or variations. Shop Drawings and Samples: 6.23. After checking and verifying all field measurements and after complying with applicable procedures specified in the General Requirements, CONTRACTOR shall submit to ENGINEER for review and approval in accordance with the accepted schedule of Shop Drawing submissions (see para- graph 2.9), or for other appropriate action if so indicated in the Supplementary Conditions, five copies (unless otherwise specified in the General Requirements} of all Shop Drawings, which will bear a stamp or specific written indication that CONTRACTOR has satisfied CONTRACTOR's responsi- bilities under the Contract Documents with respect to the review of the submission. All submissions will be identified as ENGINEER may require. The data shown on the Shop Drawings will be complete with respect to quantities, dimen- sions, specified perfon'nance and design cdteria,-materials and similar data to enable ENGINEER to review the infor- mation as required. 6.24. CONTRACTOR shah also submit to ENGINEER for review and approval with such promptness as to cause no delay in Work. all samples required by the Contract Doc- uments. All samples will have been checked by and accom- panied by a specific written indication that CONTRACTOR has satisfied CONTRACTOR's responsibilities under the Contract Documents with respect to thc review of the sub- mission and will bc identified clearly as to material, Supplier. pertinent data such as catalog number? and the use for which intended. 6.25.1. Before submission of each Shop Drawing or sample CONTRACTOR. shall have determined and veal- fled all quantities, dimensions, specified performance cfi- teria, installation reqdlrements, materials, catalog num- bers and similar data with respect thereto and reviewed or coordinated each Shop Drawing or sa. mple with other Shop Drawings and samples and with the requirements of the Work and the Contract Documents. ' "6.25.2 "At the time of each submission. CONTRAC- TOR shall give ENOiNEER specific written notice of each variation that thc Shop Drawings or samples may have from the requirements of the Contract Documents, and. in addition, shall cause a specific notation to be made on *See Supplementary Conditions