|
each Shop Drawing submitted to ENGINEER for raview
<br /> and approval of each such variation.
<br />
<br /> 6.26. ENGINEER will r~view and approve with reason-
<br />able promptness Shop Drawings and samples, but ENGI-
<br />NEER's review and approval will be only for conformance
<br />with the design concept of the Project and for compliance
<br />with the information given in the Contract Documents and
<br />shall not extend to means, methods, techniques, sequences
<br />or procedures ofconstraction (except where a specific means,
<br />method, technique, sequence or procedure of constructlon is
<br />indicated in or required by the Contract Documents) or to
<br />safety precautions or programs incident thereto. The review
<br />and approval of a separate item as such will not indicate
<br />approval of the assembly in which the item functions. CON-
<br />TRACTOR thali make corrections required by ENGINEER,
<br />and shall return the required number of corrected copies of
<br />Shop Drawings and submit as required new samples for review
<br />and approval. CONTRACTOR shall direct specific attention
<br />in writing to revisions other than the corrections called for
<br />by ENGINEER on previous submittals.
<br />
<br /> 6.27. ENGINEER's review and approval of Shop Draw-
<br /> ings or samples shall not relieve CONTRACTOR from
<br /> responsibility for any variation from the requirements of the
<br /> Contract Documents unless CONTRACTOR has in writing
<br /> called ENGINEER's attention to each such variation at the
<br /> time of submission as required by paragraph 6.25.2 and
<br /> ENGINEER has given written approval, of each such varia-
<br /> tion by a specific written notation thereof incorporated in or
<br /> accompanying the Shop Drawing or sample approval; nor
<br /> will any 'approval by ENGINEER relieve CONTKACTOR
<br /> from responsibility for errors or omissions in the Shop Draw-
<br /> ings or from responsibility for having complied with the pro-
<br /> visions of paragraph 6.25.1.
<br />
<br /> 6.28. Where a Shop Drawing or sample is required by the
<br /> Specifications, any related Work performed prior to ENGI-
<br /> NEER's review and approval of the pertinent submission will
<br /> be the sole expense and responsibility of CONTRACTOR.
<br />
<br />Continuing the Work:
<br /> 6.29. CONTRACTOR shall carry on the Work and adhere
<br />to the progress schedule during all disputes or disagreements
<br />with OWNER. No Work shall be delayed or postponed pend-
<br />ing resolution of any disputes or disagreements, except as
<br />permitted by paragraph 15.5 or as CONTRACTOR and
<br />OWNER may otherwise agree in writing.
<br />
<br />* ' Indemnlfication:
<br /> 6.30. To the fullest'extent permitted by Laws and Regu-
<br /> lations CONTRACTOR shall indemnify and hold .harmless
<br /> OWNER and ENGINEER and their consultants, agents and
<br /> employees from and against all claims, damages, losses and
<br /> expenses, direct, indirect or consequential (including but not
<br /> limited t6 fees and charges of engineers, architects, attorneys
<br /> and other professionals and court and arbitration costs) aris-
<br /> ing out of or resulting from the performance of the Work,
<br />
<br />provided that any such claim, damage, loss or expense (a) is
<br />attributable to bodily injury, sickness, disease or death, or to
<br />injury to or destruction of tangible property (other than the
<br />Work itself) including the loss of use resulting therefrom and
<br />(b) is caused in whole or in part by any negligent act or
<br />omission of CONTRACTOR, any Subcontractor. any person
<br />or organization directly or indirectly employed by any of them
<br />to perform or furnish any of the Work or anyone for whose
<br />acts any of them may be liable, regardless of whether or not
<br />it is caused in part by a party indemnified hereunder or arises
<br />by or is imposed by Law and Regulations regardless of the
<br />negligence of any such party.
<br />
<br /> 6.31. In any and all claims against OWNER or ENGI-
<br />NEER or any of their consultants, agents or employees by
<br />any employee of CONTRACTOR, any Subcontractor. any
<br />person or organization dWectly or indiroctly employed by any
<br />of them to perform or furnish any of the Work or anyo ne for
<br />whose acts any of them may be liable, the indemnification
<br />obligation under paragraph 6.30 shall not be limited in any
<br />way by any limitation on the amount or type of damages,
<br />compensatiov-or benefits payable by or for CONTRACTOR
<br />· or any such Subcontractor or other person or organization
<br />under workers' or workmen's compensation acts, disability
<br />benefit acts or other employee benefit acts.
<br /> 6.32. The obligations of CONTKA. CTOR under para-
<br /> graph 6.30 shall not extend to the liability of ENGINEER,
<br /> ENGINEER's consultants, agents or employees arising out
<br /> of the preparation or approval of maps, drawings, opinions,
<br /> reports, surveys, Change Orders, designs or specifications.
<br />
<br />ARTICLE 7--OTHER WORK
<br />
<br />Related Work off
<br /> 7.1, OWlqER may perform other work related to the Proj'
<br />eot at the site by OWNER's own forces, have other work
<br />performed by utility owners or let other direct contracts therefor
<br />which shall contain General Conditions similar to these. If
<br />the fact that such other work is to be performed was not noted
<br />in the Contract Documents, written notice thereof will he
<br />given to CONTRACTOR prior to starting any such other
<br />work; and, if CONTRACTOR believes that such perfor-
<br />mance will involve additional expense to CONTRACTOR or
<br />requires additional time and the parties are unable to'agree
<br />as to the extent thereof, CONTRACTOR may make a claim
<br />therefor as provided in Articles I 1 and 12.
<br /> 7.2. CONTRACTOR shall afford each utility owner and
<br /> other contractor who is a party to such a direct contract (or
<br /> OWNER, if OWNER is performing thc additional work with
<br /> OWNER's employees) proper and safe access to the site and
<br /> a reasonable opportunity for the introduction and storage of
<br /> materials and equipment and the execution of such work, and
<br /> shall properly connect and coordinate the Work with theirs.
<br /> CONTRACTOR shall do all cutting, fitting and patching of
<br /> the Work that may be required to make its several parts come
<br /> together properly and integrate with such other work. CON-
<br />
<br />*See Supplementary Conditions
<br />
<br />
<br />
|