07-E T-Hangar Contract Award - Laserfiche WebLink

Home Browse Search

1.6 QUALITY ASSURANCE A. Erector Qualifications: An experienced erector who has specialized in erecting and installing work similar in material, design, and extent to that indicated for this Project and who is accept- able to manufacturer. B. Professional Engineer Qualifications: A professional engineer who is legally qualified to prac- tice in jurisdiction where Project is located and who is experienced in providing engineering services of the kind indicated. Engineering services are defined as those performed for installa- tions of metal building systems that are similar to those indicated for this Project in material, design, and extent. C. Manufacturer Qualifications: A firm experienced in manufacturing metal building systems similar to those indicated for this Project and with a record of successful in-service perform- 1. Engineering Responsibility: Preparation of Shop Drawings, testing program develop- ment, test result interpretation, and comprehensive engineering analysis by a qualified professional engineer. D. Surveyor Qualifications: A land surveyor who is legally qualified to practice in jurisdiction where Project is located and who is experienced in providing surveying services of the kind in- dicated. E. Source Limitations: Obtain each type of metal building system component through one source from a single manufacturer. F. Product Options: Drawings indicate size, profiles, and dimensional requirements of metal building system and are based on the specific system indicated. Other manufacturers' systems with equal performance characteristics may be considered. Refer to Division 1 Section "Substi- tutions.'' 1. Do not modify intended aesthetic effects, as judged solely by Architect, except with Ar- chitect's approval. If modifications are proposed, submit comprehensive explanatory data to Architect for review. 2. Manufacturing system represented on drawings is Erect-A-Tube, Inc. G. Welding: Qualify procedures and personnel according to AWS DI.1, "Structural Welding Code--Steel"; and AWS D1.3, "Structural Welding Code--Sheet Steel." 1.7 DELIVERY, STORAGE, AND HANDLING A. Deliver components, sheets, panels, and other manufactured items so as not to be damaged or deformed. Package roof and wall panels for protection during transportation and handling. B. Handling: Unload, store, and erect roof and wall panels to prevent bending, warping, twisting, and surface damage. C. Stack materials on platforms or pallets, covered with tarpaulins or other suitable weathertight and ventilated covering. Store roof and wall panels to ensure dryness. Do not store panels in contact with other materials that might cause staining, denting, or other surface damage. City of Paris, Texas 13125 - 4 T-Hangar Building