07-E T-Hangar Contract Award - Laserfiche WebLink

Home Browse Search

1.8 PROJECT CONDITIONS A. Weather Limitations: Proceed with installation only when weather conditions permit roof and wall panel installation to be performed according to manufacturer's written instructions and war- ranty requirements. B. Field Measurements: Verify metal building system foundations by field measurements before metal building fabrication and indicate measurements on Shop Drawings. Coordinate fabrica- tion schedule with construction progress to avoid delaying the Work. 1.9 COORDINATION A. Coordinate size and location of concrete foundations and casting of anchor-bolt inserts into foundation walls and footings. Concrete, reinforcement, and formwork requirements are speci- fied in Specification 03300 "Cast-in-Place Concrete." 1.10 WARRANTY A. General Warranty: Special warranties specified in this Article shall not deprive Owner of other rights Owner may have under other provisions of the Contract Documents and shall be in addi- tion to, and run concurrent with, other warranties made by Contractor under requirements of the Contract Documents. B. Special Warranty on Panels: Written warranty, executed by manufacturer agreeing to repair or replace roof and wall panels that fail in materials or workmanship within specified warranty pe- riod. 1. Warranty Period: Three years from date of Substantial Completion. C. Special Warranty on Panel Finishes: Written warranty, signed by manufacturer agreeing to re- pair finish or replace metal panels that show evidence of deterioration of factory-applied fin- ishes within specified warranty period. Deterioration of finish includes, but is not limited to, color fade, chalking, cracking, peeling, and loss of film integrity. 1. Warranty Period for Roof Panels: 20 years from date of Substantial Completion. 2. Warranty Period for Wall Panels: 20 years from date of Substantial Completion. PART 2 - PRODUCTS 2.1 MANUFACTURERS A. Available Manufacturers: Subject to compliance with requirements, manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following: 1. Behlan Mfg. Co. 2. Erect-A-Tube, Inc. 3. Fulfab, Inc. 4. R & M Steel Company 5. Alliance Steel 2.2 STRUCTURAL FRAMING A. Primary structural framing shall be main load carry structural members. They shall include door trusses, rafters, interior columns, and exterior columns. City of Paris, Texas 13125 - 5 T-Hangar Building