Laserfiche WebLink
Paris Santa Fe-Frisco Depot Rehabilitation ~ KEYSTONE ARCHITECTS <br /> July 10, 2001 <br /> <br /> D. Fasteners: As required, No. 13 gauge, 1-3/8" long, 19/64" head or No. 0.098 gauge, <br /> 1-1/4" long, Annular ringed 6d drywall nails, for attachment for wall board studs or 1- <br /> 1/4" type "W" bugle head screw. Self-drilling and self-tapping, No. 8 pan head. <br /> <br />PART 3 - EXECUTION <br /> <br />3.01 INSTALLATION <br /> <br /> A. Float and tape to a smooth level surface. Allow to cure for 48 hrs prior to plaster <br /> texturing. <br /> <br /> B. Medium texture. No spray application of plaster texturing will be allowed. If during <br /> application, any adjacent surfaces or areas are contaminated, contractor must return all <br /> affected areas to original. Pre-condition and resume application of texturing using roller <br /> application only, or approved equal texture. <br /> <br /> C. Install trim at all internal and external angles formed by the intersection of either panel <br /> surfaces or other surfaces. Apply comer bead to all vertical or horizontal external <br /> comers in accordance with manufacturer'sdirections. <br /> <br /> * * END OF SECTION * * <br /> <br /> Section 09250 <br /> Page 2-2 <br /> <br /> <br />