05-D Animal Shelter Contract - Laserfiche WebLink

Home Browse Search

Division 8-C Fin. Hardware FINISHING HARDWARE GENERALLY: It is the intention of this specification to cover a complete job of finishing hardware. If the Con- -_tractor or Dealer discovers any errors or omissions, they should be called to the attention of the Architect prior to the opening of bids. Include all expansion shields, bolts, screws, etc., of type, and finish required to pro- perly attach hardware. Each item of finishing hardware shall be properly wrapped and marked for the particular opening or place in the building. While catalogue numbers of a particular manufacturer is listed herein-after, equal products of other manufactures may be used when approved by Architect. The Contractor is cautioned that regardless of catalogue numbers listed, all locks shall have keepers and strikes of suuficient length to avoid the latch bolt from coming in contact with door casing. Finishing hardware shall be installed and fitted prior to painting and protected during painting. Hardware shall be adjusted, and cleaned on completion. SCHEDULES: Promptly after the award of Contract, the Supplier shall submit to the Architect for approval three (3) copies of hardware schedule. No hardware shall be - delivered until schedule has been checked and approved. This schedule shall contain all the finish hardware, door schedule numbers, swing of doors, door material, door sizes, frame material and all other information necessary for proper application, TEMPLATE HARDWARE: All hardware for metal doors and metal jambs shall be made to template and secures with machine screws. The supplier shall promptly after the Architect's approval of schedule furnish templates to the metal door and frame manufacturer showing the proper installation of locks, butts, door closers, stops, holders, etc. Surface mounted hardware will be properly reinforced by the metal and frame manufacturer, but will be drilled and tapped on the job by the erector. The supplier of finishing hard- ware shall secure a copy of approved shop drawings where template hardware is used and shall make sure that proper provisions are being made for its application. FINISA: Except where otherwise called for the finish of all items shall be: Antique Bronze, oiled US10B. KEYS AND KEYING: A11 locks shall be mastered keyed and grand master keyed. All keying shall be as directed by the Architect. Furnish two keys to each lock and three of each masterkeys, and three grand master keys. All cylinder locks shall be five pin tumbler. Except where otherwise called for all locks shall be keyed differently. Keys shall be properly tagged and delivered to the Owner making sure that no keys are left in circulation.