Laserfiche WebLink
Division 2-8 Site Improv. <br />dRADING 8'OR SITE IMPROVEMENTS CONT'D: Sprinkle as required <br />and bring sub-grade to compaction of 95% standard proctor. <br />Hand tamp as required in corners and adjoining other work. <br />Obtain permits from city and state for all work on public <br />property and report to the Architect if any grade <br />requirements conflict with those shown on plans. <br />CONCRSTB: shall be formed, mixed, reinforced, installed and <br />cured as called for in Division 3, except all concrete in <br />this section shall have 5$ air entrainer admixture. Secure <br />and pay all permits, licenses, etc., and comply with all <br />local ordinances. <br />E%ISTING CONCRETB 1POR1C: Where new concrete joins existing <br />concrete it shall cut to a straight line. Where the plans <br />call for or require removing or cutting of existing walks <br />or curbs, and new concrete work joins broken joint of <br />existing work; "saw cut" the existing concrete to a smooth <br />straight joint before new concrete is poured. Cutting <br />shall be done by this trade where new pipes and plumbing <br />lines require cutting of existing walks or curbs; replace <br />and patch as described above. <br />CONCRETE PAVING: Where shown on plans shall be 5" thick, <br />installed on 4" thick sand cushion, and reinforced #3 zods <br />18" oc each way. Provide redwood expansion joints where <br />shown and as detailed 30' apart and finish as called for on <br />walks. <br />A/C BQIIIPMNT PAD: Shall be of a size shown 4" thick and <br />raised somewhat above finished grade. Finish all expoaed <br />edges. <br />TRANSFORDER PAD: shall be saw cut and patched in accordance <br />with the Power company 5" thick and of size required; to <br />extend new electric service from existing service. <br />CONCRETE 1PALICS:Walks and concrete islands shall be 4" thick <br />of width and location shown. All walks shall be poured on <br />3" sand cushion. Install 4" red wood expansion joints not <br />over 30' apart at and at each change of direction and where <br />joins curb. Surface shall have wood float finish, marked <br />off and scored in 4' sections or as otherwise directed. <br /> <br />