Laserfiche WebLink
BRAKES <br /> <br />The extend-a-hoe loader brakes shall be a fully hydraulic, multiple wet disk brake <br />located inboard. <br /> <br />2. The brakes also shall have the following features: <br /> <br />Oil cooled brakes <br />Brakes operated by two, suspended brake pedals <br />Maintenance-free and self-adjusting <br /> <br />LOADER <br /> <br />1. The loader arms shall be heavy duty and in-line. <br /> <br />2. The loader arms also shall have the following features: <br /> <br />Arch design for short turning circle <br />Dual parallel lift cylinders <br /> <br />3. The loader linkage shall have the following features: <br /> <br />B. <br />C. <br />D. <br />E. <br />F. <br /> <br />Dual parallel bucket cylinders <br />Bucket cylinders with reverse linkage <br />Dual cast dump links to bucket <br />Full bucket rollover for dozing <br />Full bucket rollover for stability in extend-a-hoe operation <br />Automatic bucket self-leveling <br /> <br />The loader bucket shall be a minimum of 93 inches wide with a 1.3 cubic yard <br />heaped capacity. <br /> <br />5. The bucket also shall have the following features: <br /> <br />Rear bucket rolled wrapper <br />Pre-drilled edge <br />Heavy duty lifting eyes <br /> <br /> <br />