Laserfiche WebLink
SPECIFICATIONS <br />1. Scope of work: <br />The owner desires to surface four existing tennis courts at <br />Travis Junior High. Two courts will receive an asphalt <br />overlay by owner before being surfaced. The other two courts <br />will be resurfaced over the existing surface. <br />2. Acceptable Materials: <br />Materials shall be equal or superior to those manufactured by <br />California Products under the trade names "Crack Filler ", <br />"Court Patch Binder ", "Concrete Preparer ", "Plexibond ", <br />"Acrylic Resurfacer ", "Fortified Plexipave" and "Plexicolor <br />Textured White Line Paint ". <br />3. Surface Application: <br />A. On Two Courts with Asphalt Overlay <br />1. Surface Preparation: Thoroughly remove all dust, dirt <br />and debris from the asphalt base. <br />2. Apply two coats of "Acrylic Resurfacer ". <br />3. Apply two coats of "Fortified Plexipave ". Color to be <br />Florida Green. <br />4. Apply "Plexicolor Textured White Line Paint" per USTA <br />specs. <br />B. On Two Courts with Existing Surface <br />1. Surface Preparation: Thoroughly clean the surface by <br />pressure washing, scraping, and blowing. Remove areas <br />where surface is not properly bonded. <br />2. Fill cracks with "Crack Filler ". <br />3. Fill low spots with "Court Patch Binder ". <br />4. Apply "Plexibond" over areas where concrete is exposed. <br />5. Apply one coat of "Acrylic Resurfacer ". <br />6. Apply two coats of "Fortified Plexipave ". <br />7. Apply "Plexicolor Textured White Line Paint" per USTA <br />specs. <br />C. Clean Up: Remove any and all debris left over from the <br />surfacing process. <br />TENNIS COURT EQUIPMENT <br />Provide and install four sets of the following: <br />a. Douglas DTP -3 internal wind net posts. <br />b. DTC "Grand Slam" Tennis Nets with velcro net straps. <br />C. Flush mount center anchors. <br />