Laserfiche WebLink
2. Submit test reports produced at the point of production for standard production <br />products with the record data for that product. <br />Q. Submit a list of Suppliers and Subcontractors as record data in accordance with <br />Section 01 31 00 — Project Administration. <br />R. Submit Notifications by CONTRACTOR in accordance with Section 01 31 00 — Project <br />Administration. <br />S. Submit Preconstruction Videos in accordance with Section 01 31 00 — Project <br />Administration. <br />A. The products of the listed suppliers are to be furnished where detailed specifications <br />list several manufacturers but do not specifically list "or equal" or "or approved equal" <br />products. Use of any products other than those specifically listed is a substitution and <br />must be approved per Paragraph 1.08. <br />S. CONTRACTOR may submit other manufacturers' products that are in full compliance <br />with the specification where detailed specifications list one or more manufacturers <br />followed by the phase "or equal" or "or approved equal". <br />1. Submit Shop Drawings of adequate detail to document that the proposed <br />product is equal or superior to the specified product. <br />2. Prove that the product is equal. It is not the ENGINEER's responsibility to <br />prove the product is not equal. <br />a. Indicate on a point by point basis for each specified feature that the <br />product is equal to the Contract Document requirements. <br />b. Make a direct comparison with the specified manufacturer's published <br />data sheets and available information. Provide this printed material <br />with the submittal. <br />C. The decision of the ENGINEER regarding the acceptability of the <br />proposed product is final. <br />3. Provide a certification that, in furnishing the proposed product as an equal, the <br />CONTRACTOR: <br />a. Has thoroughly examined the proposed product and has determined <br />that it is equal or superior in all respects to the product specified. <br />b. Has determined that the product will perform in the same manner as <br />the specified product. <br />C. Will provide the same warranties and/or bonds as for the product <br />specified. <br />d. Will assume all responsibility to coordinate any modifications that may <br />be necessary to incorporate the product into the Work and will waive <br />all claims for additional materials or effort which may be necessary to <br />incorporate the product into the Project. <br />e. Will maintain or improve the delivery and installation schedule as for <br />the specified product. <br />4. A modification request is not required for any product that is in complete <br />compliance with the Contract Documents. <br />1.08 SUBMITTALSSUBSTITUTIONS <br />City of Paris, Texas 01 33 00 Page 8 Of 11 Submittals <br />9/10/2020 <br />