13 & 14 Building Code Updates (2)

Home Browse Search

(3) Evidence acceptable to the authority having jurisdiction such as a manufacturer's self-evaluation or an engineering judgment signed and sealed by a qualified Registered licensed Professional Engineer in the State of Texas. Informational Note: Additional documentation for equipment may include certificates demonstrating compliance with applicable equipment standards, indicating special conditions of use, and other pertinent information. [The remainder of the section, through and including Subsection (G), remains unchanged.] Amend Section 505.7 Special Precaution, Subsection (A), Implementation of Zone Classification System, to read as follows: 505.7 Special Precaution. [Existing text unchanged.] (A) Implementation of Zone Classification System. Classification of areas, engineering and design, selection of equipment and wiring methods, installation, and inspection shall be performed by a qualified persons Registered licensed Professional Engineer in the State of Texas. [The remainder of the section, up through and including Subsection (Fj remains unchanged.l Amend Article 695.6, Power Whiner, Subsection (A).(1), Services and On-site Power Production Facilities, to read as follows 695.6 Power Wiring. [Existing text unchanged.] (A) SuIply Conductors. (1) Services and On-site Power Production Facilities. Service conductors and conductors supplied by on-site power production facilities shall be physically routed outside a building(s) and shall be installed as service -entrance conductors in accordance with 230.6, 230.9, and Parts 111 and IV of Article 230. Where supply conductors cannot be physically routed outside of buildings, the conductors shall be permitted to be routed through the building(s) where installed in accordance with 230.6(11 or (2l. [The remainder of the section, up through and including Subsection (J), remains unchanged.] 59