Laserfiche WebLink
3. FIELD CONNECTIONS shall normally be the bolting of structural <br />members using high strength bolts and machine bolts in shop <br />drilled, punched or reamed holes, in accordance with standard <br />practices. <br />4. WORRMANSHIP and TOLERANCES of the manufactured building parts <br />shall be in accordance with normally accepted quality control <br />standards. <br />1.5.6 SHOP PAINTING <br />SHOP PAINTING of inembers with shop primer paint shall be <br />provided for the purpose of protecting the steel members during <br />transforation, job site storage, and during erection. <br />1. CLEANING of steel members shall normally be the removal of <br />oil, dirt, loose scale and/or foreign matter prior to painting in <br />accordance with SSPC-SP2. <br />2. COATING of steel members shall normally be one shop coat of <br />primer paint equal or exceeding the end performance requirements of <br />Federal Specification TTP 636. <br />1.5.7 ALL FRAMING MEMBERS <br />ALL FRAMING MEMBERS shall carry an easily visible identifying <br />painted or stenciled piecemark. <br />1.5.8 CONTINUOUS OR SECTIONAL GRAVITY RIDGE VENTILATORS <br />CONTINUOUS OR SECTIONAL GRAVITY RIDGE VENTILATORS shall be <br />supplied with a screen, and will be furnished in 101-0" lengths. <br />Multiunit splice drains and end cap skirt assemblies, where <br />required, shall be provided to make up the specified length. <br />Continuous or sectional ventilators are to be furnished without <br />dampers. <br />1.5.9 PERSONNEL DOORS <br />PERSONNEL DOORS shall normally be a single door 3070 in flush <br />panel (solid). <br />1. DOOR LEAF shall be non-handed, 1 3/4" thick, full flush, <br />fabricated from 20 gage roller leveled, galvanized mill bonderized <br />face sheets. Door finishes are to be white embossed. Top and <br />bottom channels shall be welded flush to face sheets. The core <br />material shall be expanded polystyrene bonded to face sheets with <br />a two component epoxy adhesive. Door edges shall be hemmed to. <br />eliminate raw edge metal, beveled on lock side and flat on hinge <br />side. Doors shall be prepared for 4 1/2" X 4 1/2" template hinges <br />76 <br />