06-L Sports Complex Consulting - Laserfiche WebLink

Home Browse Search

City of Paris, Texas 3 1. Be responsible for setting benchmarks only for the construction work. The contractor shall deternune alignment and grade of work to be constructed from these reference marks. 2. Make periodic visits to the site when deemed appropriate by the Consultant in the exercise of his professional judgment to observe the progress and quality of the executed work and to deternune in general if the work is proceeding in accordance with the plans, specifications, and contract documents; he will not be required to make exhaustive or continuous on-site inspections to check the quality or quantity of the work; he will not be responsible for having quality control testing done; he will not be responsible for the techniques and sequences of construction and he will not be responsible for the contractor's failure to perform the construction work and will endeavor to guazd the Owner against defects and deficiencies in the work of the Contractors, and may disapprove work as failing to conform to the plans and specifications, and contract documents. 3. Check samples, catalog data, laboratory testing, shop drawings, mill tests of materials and equipment, and other data which the Contractor is required to submit, only for the conformance with the design concept of the Project and compliance with the information given by the plans, specifications, and contract documents; and accept or reject all such submittal data furnished by the Contractor, materials used, and work performed by the Contractor as either complying or not complying with the intent of the plans, specifications, and contract documents. 4. Consult and advise with the Owner, act as the Owner's representative at the Project site, issue a11 instructions of the Owner to the construction contractors that do not conflict with good construction practice, and prepare routine change orders as required. 5. Based on his on-site observations as an experienced and qualified design professional and on his review of the contractor's applications for payment, determine the amount owing to the contractors in such amounts; such approvals of payment to constitute a representation to the Owner, based on such observations and review and data comprising such applications, that the work has progressed to the point indicated and that, to the best of his knowledge, information, and belief, the quality the work is in accordance with the plans, specifications, and contract documem subject to the results of subsequent testing called for in the specifications and contract documents and any qualifications stated in this approval. 6. Conduct, in company with the Owner's representative, a final inspection of the Project for conformance with the design concept of the Project and compliance with the plans, specifications, and contract documents, and recommend in writing final payment to the contractor.